Budgetlight LED Bulkheads
Budgetlight LED Bulkheads are very suitable as general lighting for staircases or hallways. In addition, if there is an emergency lighting unit in your building, the Budgetlight LED wall fixtures can be used as emergency lighting. In case of light loss, they will stay switched on. The Budgetlight LED wall and ceiling fixtures are available in sensor-controlled version that respond to motion and twilight. They will then automatically turn on and off. Due to this intelligent LED technology, you will save a lot of energy! At Budgetlight, we offer Budgetlight LED Bulkheads in fully water- and dustproof options so that they are suitable for outdoor use.
Budgetlight LED Bulkheads are very suitable as general lighting for staircases or hallways. In addition, if there is an emergency lighting unit in your building, the Budgetlight LED wall fixtures can be used as emergency lighting. In case of light loss, they will stay switched on. The Budgetlight LED wall and ceiling fixtures are available in sensor-controlled version that respond to motion and twilight. They will then automatically turn on and off. Due to this intelligent LED technology, you will save a lot of energy! At Budgetlight, we offer Budgetlight LED Bulkheads in fully water- and dustproof options so that they are suitable for outdoor use.
You can have up to 5 products in the comparison list.
The IP value indicates the degree of protection against the ingress of moisture and dust. The 1st digit (0 = not protected until 6 = completely dustproof) indicates the protection against dust. The 2nd digit (0 = not protected until 8 = protected against immersion) indicates the protection against water. Products with an IP44 rating are splashproof and products with an IP65 rating or higher are (completely) dustproof and waterproof.
The impact protection value (IK) stands for impact resistance and protection against vandalism. This is expressed in combination with 2 digits (IK00 - IK10). Products with IK00 are not protected against resistance. Products with IK10 offer resistance to shocks of 20 Joule and are also vandal-proof.
The colour code is a combination of colour rendering (CRI) and light colour (Kelvin). The first number indicates the colour rendering (1 = very poor colour rendering, 9 = maximum colour fastness). The second and third number contains the light colour. Example: the colour code 830 consists of good colour rendering (8) and warm white light (3000K).
Lighting with a built-in emergency lighting unit (battery) continues to burn for a certain time if the power fails.
Every bulb or fixture has an energy efficiency class A to G. Energy label A is the most efficient and G the least. LED lighting is the most sustainable lighting technique. Even if a LED bulb is rated E or lower, they still save 70% of energy compared to conventional lighting with the same energy label. Why is it the same label then? To motivate LED brands to get even more durable.