Ledvance LED Wall / Ceiling Lights
Ledvance LED wall and ceiling fixtures are direct replacers for conventional fluorescent fixtures (2x13W/2x18W/2x36W). By replacing you can realize an energy saving up to 55%. Furthermore, you will enjoy the Ledvance LED fixtures much longer due to the long lifespan of 50.000 hours. The Ledvance LED wall and ceiling fixtures have a good resistance against vandalism because of the TORX screws and a high IK-value. On top of that, there are Ledvance wall and ceiling fixtures available with a sensor that makes motion and twilight detection possible.
Ledvance LED wall and ceiling fixtures are direct replacers for conventional fluorescent fixtures (2x13W/2x18W/2x36W). By replacing you can realize an energy saving up to 55%. Furthermore, you will enjoy the Ledvance LED fixtures much longer due to the long lifespan of 50.000 hours. The Ledvance LED wall and ceiling fixtures have a good resistance against vandalism because of the TORX screws and a high IK-value. On top of that, there are Ledvance wall and ceiling fixtures available with a sensor that makes motion and twilight detection possible.
You can have up to 5 products in the comparison list.
The IP value indicates the degree of protection against the ingress of moisture and dust. The 1st digit (0 = not protected until 6 = completely dustproof) indicates the protection against dust. The 2nd digit (0 = not protected until 8 = protected against immersion) indicates the protection against water. Products with an IP44 rating are splashproof and products with an IP65 rating or higher are (completely) dustproof and waterproof.
The impact protection value (IK) stands for impact resistance and protection against vandalism. This is expressed in combination with 2 digits (IK00 - IK10). Products with IK00 are not protected against resistance. Products with IK10 offer resistance to shocks of 20 Joule and are also vandal-proof.
The colour code is a combination of colour rendering (CRI) and light colour (Kelvin). The first number indicates the colour rendering (1 = very poor colour rendering, 9 = maximum colour fastness). The second and third number contains the light colour. Example: the colour code 830 consists of good colour rendering (8) and warm white light (3000K).
Lighting with a built-in emergency lighting unit (battery) continues to burn for a certain time if the power fails.
Every bulb or fixture has an energy efficiency class A to G. Energy label A is the most efficient and G the least. LED lighting is the most sustainable lighting technique. Even if a LED bulb is rated E or lower, they still save 70% of energy compared to conventional lighting with the same energy label. Why is it the same label then? To motivate LED brands to get even more durable.