LED Strip SMD 60LEDs/M 60W 1100lm 24v - 960 Daylight | 5M/10mm - Best Colour Rendering - Indoor - Excl. Driver

The colour code is a combination of colour rendering (CRI) and light colour (Kelvin). The first number indicates the colour rendering (1 = very poor colour rendering, 9 = maximum colour fastness). The second and third number contains the light colour. Example: the colour code 830 consists of good colour rendering (8) and warm white light (3000K).

The light color indicates the color of the light emitted: white, colored, or UV. For many products in our assortment, the light is white, available in a range from very warm white to daylight white (expressed in Kelvin). With colored light, you have two options: 1. A single fixed color, such as red or green. 2. RGBW, which means you can adjust the light color at any time: white or colored.

The colour rendering index (CRI) indicates how accurately colours are represented under a beam of light. The index goes from 1 to 99, with a CRI of 1 being the poorest and a CRI of 99 being the best possible. Be careful not to confuse colour rendering with colour temperature (K).

Lumen (lm) is the term used to describe the total amount of visible light emitted by a light source. The higher the number of lumens, the brighter it is.

The IP value indicates the degree of protection against the ingress of moisture and dust. The 1st digit (0 = not protected until 6 = completely dustproof) indicates the protection against dust. The 2nd digit (0 = not protected until 8 = protected against immersion) indicates the protection against water. Products with an IP44 rating are splashproof and products with an IP65 rating or higher are (completely) dustproof and waterproof.

Lighting with a sensor only turns on when it receives a specific signal. This reduces energy costs. The (built-in) sensors respond to darkness (twilight switch) and/or movement (motion sensor).